Lightning Series DC to DC Converters ...

Lightning  Series - Single Input, Single Output, High Voltage DC to DC converters up to 2KV

The Lightning Series feature a family of ultra low power, high output voltage DC-DC converters with a single input and a single output voltage. Output voltage (Vout) can be either a fixed and isolated output or a variable output voltage (Vout) controlled by an external pin or variable Vin controlled. Vin range of 2.5V to 5V or 12V with Vout targets of 300 to 1.5KV.

AM Power Systems standard series can be customized to customer's specific application at a nominal NRE charge (see datasheets for details).

Product Datasheets
- AM0603 v-NM
- AM1203 f-PM
- AM xx03 Very Low Power Lightning Series
- AM28FXXX Mid-Range Power Lightning Series


Product Press Annoucements
1) AM12f024-PM:
Introduction of a 200 watt DC-DC converter that has a variable input range of 11-16 VDC and a fixed output voltage of 24 VDC.

2) AM0503-PM, AM0603-PM, AM0803-PM, AM1003-PM, AM1203-PM
Introduction of compact, very low power, high output voltage DC-DC converters with a variable input voltage ranging from 3 to 5.5 volts the single outputs are 500V, 600V, 800V, 1KV and 1.2KV.

3) AM28f015-PM (#1), AM28f005-PM (#2), AM28f008-NM (#3)
Introduction of compact, low power, single output voltage DC-DC converters with a nominal input voltage of 28 volts with a 20% variability, the single outputs are +5V, +15V and -8V.

Part Numbering Scheme

AMPS Warranty and Safety Statement:
NOTICE :
(PLEASE READ CAREFULLY):

AM POWER SYSTEMS (AMPS) PROCLAIMS THAT ANY PRODUCT USE, RECOMMENDATION OR PRODUCT INFORMATION PRESENTED HEREIN IS AN ACCURATE DESCRIPTION OF THE TYPICAL CHARACTERISTICS AND/OR USEAGE OF THE PRODUCT, HOWEVER IT IS THE CUSTOMER’S RESPONSIBILITY TO THOROUGHLY TEST THE PRODUCT IN YOUR SPECIFIC APPLICATION TO DETERMINE ITS PERFORMANCE, APPLICABILITY, EFFICACY, AND SAFETY UNDER YOUR CONDITIONS OF USE. SUGGESTIONS OF USES SHOULD NOT BE TAKEN AS INDUCEMENTS TO INFRINGE ON ANY PATENTS OR WARRANTIES, UNLESS AM POWER SYSTEMS PROVIDES YOU WITH A SPECIFIC WRITTEN WARRANTY OF ASSURANCE FOR A PARTICULAR USE, AM POWER SYSTEMS SOLE WARRANTY, AS SUPPLIED, WILL MEET AM POWER SYSTEMS CURRENT PRODUCT SPECIFICATIONS. AM POWER SYSTEMS SPECIFICALLY DISCLAIMS ANY OTHER EXPRESSED OR IMPLIED WARRANTY, INCLUDING THE WARRANTIES OF USEABILITY AND/OR FITNESS FOR ANY PARTICULAR PURPOSE. YOUR EXCLUSIVE REMEDY AND AM POWER SYSTEMS' SOLE LIABILITY FOR BREACH OF WARRANTY, AT AM POWER SYSTEMS'S DISCRETION, IS LIMITED TO THE REFUND OF THE PURCHASE PRICE OR REPLACEMENT OF ANY PRODUCT SHOWN TO BE OTHER THAN AS WARRANTED, AND AM POWER SYSTEMS EXPRESSLY DISCLAIMS ANY LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES.

Safety Warning :

DANGER - HIGH VOLTAGE

High voltage power conversion devices and power supplies always present a serious risk of harm and personal injury if not used in accordance with design and/or use specifications, if used in applications on products for which they are not intended or designed, or if used by untrained or unqualified personnel. Before handling, testing, incorporating or using AM POWER SYSTEMS' products, read, understand and thereafter adhere to all instructions, protocol, cautions and safety procedures applicable not only to AM POWER SYSTEMS' products but to each and every product and/or application into which AM POWER SYSTEMS' products are incorporated or assembled, as well as industry standard safety practices and rules and regulations regarding the use of high voltage.

For price/leadtime information and for ordering, please contact ( O ) 775-241-0937 or ( c ) 408-691-0937 or download our RFQ form here.